Check Your Indoor Humidity Instantly!

Is your home or office too dry?

The correct humidity level is quite important in the heating season.

Relative Humidifer is an important issue for a few reasons. It affects our level of comfort. If it’s too dry, we are unable to stay hot despite how high we set the thermostat. It could also affect the capacity of some individuals to breathe. Humidity levels additionally influence the cost of heating as lower humidity levels need higher temperatures in order for us to feel cosy.

Indoor humidity levels are in addition considered to be connected to the occurrence of colds and allergic reactions. And excessive humidity can result in unwanted mould growth along with damage and discoloration of window sills, walls, and other building components.
So for a number of different reasons people pay more attention to the indoor relative humidity levels during the heating season.

Many people don’t quite know what relative humidity is. A basic definition is that it’s the level of water vapour inside the air in your home.

Your own Humidifer
A typical method of measuring indoor humidity is to get a little apparatus at your local hardware store to help you figure it out. These items are designed to sit on a table or shelf and are approximately three inches square in size. They usually sell for less than $20.

Personally, I find that these tools are frequently imprecise, compared to a better quality, commercial device.The ones I tested were not simply incorrect by a handful of percentage points. These devices were wrong by a large number of points!

This same device usually shows a “comfort zone,” which should specify the temperature and relative humidity you would feel the most comfy at. There is a fast, free, and precise method to gauge your indoor humidity. Although you won’t find out the exact humidity level, you will be able to determine if it’s too humid or not humid enough in your home.

Remember that mould thrives in a lot of humidity. But, not enough humidity, and you’ll feel uncomfortable.

I have tested this method next to the commercial indoor air quality reader I use and found it to be very exact in figuring out when the humidity level is excessively high or too low.

To figure this out, you’ll only need to look at two items.

You will need to examine your windows. Moisture on your windows means the humidity is too high. A couple of drops of water would not be an indication of this.We’re talking about enough moisture so it runs down the glass and develops into little puddles on the window sill.

If you see this, it means your humidity level is excessive. If you continue to keep this excessive humidity level, you are promoting mould production by offering the right environment. It will happen.

You might find water accumulating on the windows in one room of your house, but not in another. For example, your bathroom} window has water often accumulating on the sill while other windows in the house remain dry. Lots of humidity in your bathroom could be the product of not leaving on the exhaust fan long enough after a bath or shower. The rest of the house is ok.

Now that you can figure out when there’s excessive humidity, how do you figure out if there’s not enough?

To figure out if it’s overly dry, you look for another simple, yet accurate sign. Static electricity. Do you experience static electric shocks if you walk across the carpet and touch something metal? Is it unlikely to comb your hair without experiencing a few strands stick straight out? Do you require a ton of hair spray? Does your pet’s fur stick out while you pet him?

These are all signals that it’s too dry in your house. It’s suggested that you raise the level of humidity.

Leave a Reply